Metal Bunk bed

0 out of 5

COLOUR & FINISH

Paint /Finish of Metal partsStove Enamel paint
Finish of head board / Tail boardStove Enamel paint
Min Powder/paint coating thickness (Micron)N.A
Colour of bed (Metal Frame)As per Buyer Choice

Description

GENERIC

ConfigurationSupported by four poles ( one at each corner of bed ) – a ladder (used to get to upper bed ) – upper bed surrounded by railing (to prevent the sleeper from falling out)
Type of bunk beds2 – Tier bunk beds ( Fixed )
Railing / guard rail at upper bedFixed
Tail boardWith
Shape of tail boardRectangular
Head restWith
Shape of headrestRectangular
Provision of under storageNo under storage provision
Number of DrawersNo Drawer
Number of boxNo Box
Provision for mosquito net hanging rodNo mosquito net hanging rod
Position of ladderFrom length side of bed
Number of steps in ladder4 Nos.
Components assemblyBy welding
Type of weldingMIG (Metal inert gas – Gas Metal Arc Welding)
Provision of mattress panelWith
Support member (jointed with frame) for mattress panelWidthwise
Number of Support members for mattress panel4 Nos.
Mode of supplyKnocked Down – To Be Assembled At Consignee Site By The Seller
Approximate Weight in Kg(To be declared)40

MATERIAL

Structure of metal bed frame including legs and head / tails / railing /supporting structureMS hollow box rectangular or square sections
Vertical leg structure sectionsTube of size 37.5 mm X 37.5 mm with 1.2 mm wall thickness
Supporting structure of horizontals sectionsTube of size 50 mm X 25 mm with 1.2 mm wall thickness
Other joining horizontal structure sectionsTube of size 25 mm X 25 mm with 1.2 mm wall thickness
Stair rail sections ( For upper level )Tube of size 25.4 mm X 25.4 mm with 1.2 mm wall thickness
Stair step sectionsTube of size 25 mm X 25 mm with 1.2 mm wall thickness
Material of mattress panelPlywood
Thickness of mattress panel (if other than CRCA sheet)12 mm
Upper bed support rail sectionsTube of size 50 mm X 25 mm with 1.2 mm wall thickness
Head board sectionsTube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness
Tail board sectionsTube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness

DIMENSION

Length of entire structure + 10 mm1830 mm
Width of entire structure + 10 mm915 mm
Height of entire structure – excluding Mosquito net holding rods (minimum ceiling clearance to be 760 mm) + 10 mm1800 mm
Actual length of bed1830 mm
Actual width of bed915 mm
Height of lower tier (Buyer should be careful while selecting keeping in mind minimum ceiling clearance as required ideally 760 mm minimum)400 mm
Guard rail height (+/- 5 MM)130 mm
Gap between beds915 mm
Size of drawers (To be declared by Buyer-Write NA if not applicable)NA
Size of Boxes(To be declared by Buyer-Write NA if not applicable)NA
Width of ladder305 mm
Height of head board (To be declared by Buyer-Write NA if not applicable)NA
Height of tail board(To be declared by Buyer-Write NA if not applicable)NA
Details of Mosquito net holding rods (To be declared by Buyer – Write NA if not applicable)NA

COLOUR & FINISH

Paint /Finish of Metal partsStove Enamel paint
Finish of head board / Tail boardStove Enamel paint
Min Powder/paint coating thickness (Micron)N.A
Colour of bed (Metal Frame)As per Buyer Choice

Reviews

There are no reviews yet.

Be the first to review “Metal Bunk bed”