Description
Standards
| Conformity to standards | CE |
| Certificate number and date | CEI/IC/G1/510/10.01.2019 |
Performance Parameters
| Purpose | Separating Serum from blood or for urine sedimentation |
| Centrifuge Design | Bench Top |
| Weight including Default Rotor in kg | 18 |
| Auto cut off | Yes |
| Timer provided | Yes |
| Maximum RPM | 2800 |
| Number of steps for RPM variation | 7 |
| Incremental Steps of Variable RPM | 400 |
| Type of Motor | Brushless (without carbons) |
| Maximum Noise level whemn working at 1 meter distance in db | 56 |
| Ambient operating Temperature range in Degree centigrade Celsius and humidity range | 0 to 50 degree centigrade and Relative humidity 15 to 90% |
| Rotor imbalance diagnostics and automatic stop if required | Yes |
| Facility to ensure that In case Machine is runing and lid is opened with manual lock by user , machine shall stop | Yes |
| Maximum Timer Set range | 60 minutes |
| Timer settings Provided | interval of 10 secondsup to 1 minute and over 1 minute up to 60 minutes in interval of 1 minute |
| Display | LCD |
| Speed Controller | Microprocessor controlled pre programmed speed controller |
| Speed Control Accuracy in case of set speed (Plus minus RPM ) | 50 |
| Rotor configuration | Swing Out Rotor |
| Rotor Feature with reference to Autoclavability | Autoclavable Rotor @ 121 Degree Celsus, |
| Maximum Volume of the tube testable | 15 ml centrifuges tubes |
| Rotor Size | 12x15ml, |
| Power supply | Single phase, 230 V 50 HZ AC Source |
| Power concumption in watts | 120 |
| Length of the Medical Centrifuge in mm | 460 |
| Width of the Medical Centrifuge in mm | 310 |
| Height of of the Medical Centrifuge in mm | 178 |
| Length of Power cord in meters | 3 |
| The Equipment shall be installed and demonstrated before Acceptance installation and demonstration | No(No installation and demonstration required and consignee can install) |
| Accessories | Spanner to tight or loose Nut of Rotor on Motor shaft head puller,spare rotor nuts ,fuse-2, Instruction Manual Book ,installation CD |
| Warranty in Years | 3 |
Material Parameters
| Assembly Material for manufacture of Medical Centrifuge | Consists of Die cast Aluminum, Aluminum sheet, Stainless Steel, CRC Steel,Plastic and Rubber |
| Lid Material of Medical Centrifuge | C.R.C Steel Finish with Powder Coating or stove painting / ABS Plastic of injection moulding |
| Body Material of Medical Centrifuge | C.R.C Steel Finish with Powder Coating or stove painting / ABS PLASTIC OF injection moulding |
| Centrifuge Bowl material of Medical Centrifuge | 304 Quality Stainless Steel Moulded |
| Material of Rotor | Aluminium, |
Reports
| ISO certification for Manufacturer | Yes |
| Certification number and date , if no certificate provided put NA | ISO-QMSI/1168/09.01.2019 |
| Copies of all certifications and reports to be provided to buyer on demand at time of supplies | Yes |
Reviews
There are no reviews yet.